Milwaukee M18 FHX-0X FUEL™ SDS-Plus Rotary Hammer with FIXTEC™ Chuck

The Milwaukee M18 FHX-0X FUEL™ SDS-Plus Rotary Hammer is a high-performance 18V cordless combination hammer with 2.5 J (EPTA) impact energy, FIXTEC™ keyless tool change system, and an optimized design for fast drilling and chiselling on concrete, masonry, and construction materials up to 26 mm.

This model is professionally refurbished: each tool is inspected, tested, and restored to its main functionalities to offer you reliable performance at a lower price than new.

Key features:
- POWERSTATE™ brushless motor for superior power, speed, and durability.
- Impact energy: 2.5 J (EPTA) for fast drilling and effective chiselling.
- FIXTEC™ system: keyless tool change between SDS-Plus chuck and 13 mm metal chuck.
- 4 operating modes: hammer drilling, chiselling, rotation, and neutral position for chisel orientation.
- Exceptional run-time: up to 125 10×50 mm holes with a single M18 HIGH OUTPUT™ 5.5 Ah battery.
- AUTOSTOP™ system: shuts off the tool in case of sudden jamming to protect the operator.
- Drilling capacity: concrete 26 mm; wood 28 mm; steel 13 mm.
- No-load speed: 0–1,150 rpm.
- Percussion frequency: 0–4,800 bpm.
- Optimized for drilling in concrete from 6 to 20 mm.
- Metal gearbox for maximum strength and durability.
- Ergonomic side handle and depth rod for control and precision.
- Compatible with M18 FCDDEXL and M18 FDDEXL dust extractors.
- REDLINK PLUS™ electronics for advanced overload protection of tool and battery.
- Works with all Milwaukee M18 batteries.

Essential technical data:
- System: M18 18V.
- Motor: POWERSTATE™ brushless.
- Chuck: SDS-Plus + 13 mm reduced shank.
- Impact energy: 2.5 J (EPTA).
- Max drilling capacity: concrete 26 mm; wood 28 mm; steel 13 mm.
- Optimized for concrete: 6–20 mm.
- No-load speed: 0–1,150 rpm.
- Percussion frequency: 0–4,800 bpm.
- Vibrations: 12.9 m/s² (concrete drilling); 14.2 m/s² (chiselling).
- Weight: approx. 3.5–4.5 kg (depending on battery used).
- Power supply: M18 battery (not included).
- Equipment: side handle, depth rod, 13 mm FIXTEC™ metal chuck, HeavyDuty case.

Typical applications:
- Drilling in concrete, masonry, bricks, and construction materials.
- Chiselling, removing plaster, tiles, and materials.
- Installation of dowels, fasteners, and anchors in construction.
- Use in construction sites, renovations, plant engineering, and maintenance.
- Support for masons, plumbers, and maintenance workers who need power and speed.